StylPro Wavelength Pro 5-in-1 LED Mask

CHARGING:
Insert the USB-C cable (provided) into the port at the bottom of the controller. Attach to a USB-C friendly power source. The battery icon will show a loading sequence when charging. The controller cannot be used while charging. To enable fast-charging, use at least a 3A power supply.

Resetting Controller
If the controller fails to charge or turn on, a reset is required. Press and hold both buttons for 20 seconds and then immediately begin charging the device, the battery icon should appear. Repeat if unsuccessful.

HOW TO USE:

Face:
1. Ensure the right and left straps are attached, and the eye protection pads are securely placed into the eye holes.
2. To adjust the size of the LED Mask, use the face fasteners. Always start on the top fastener, and move to the bottom fastener to loosen the fit if needed.
3. Place the LED Mask onto your face and securely attach the straps around the crown of your head.
4. Long press the power/function button to turn on the LED Mask.
5. To ensure the Face function is selected - short press the 'power/function' button until the 'Face' icon appears on the top panel of your controller.
6. To select your desired mode, short-press the 'Mode' button. To find out which mode is best suited for you, please see our 'MODES' breakdown below.
7. Once you have selected your desired mode, enjoy a 10-15 minute session.
8. To turn off your LED Mask before you have completed your session, long-press the power/function button.

Neck, Chest & Back:
1. Unclip the fasteners and remove the eye protection pads whilst ensuring the right and left straps are attached to the LED Mask.
2. Front of neck and chest: place the LED Mask onto your chest and securely attach the straps around the back of your neck. Allow the LED Mask to rest on your collarbones and chest.
3. Back of neck and upper back: place the LED Mask onto your upper back and securely attach the straps around the front of your neck. Allow the LED Mask to rest on the back of your neck and upper back. Top tip: for a comfortable fit, allow the straps to lay below your neck.
4. Long press the power/function button to turn on the LED Mask.
5. To ensure the Neck, Chest & Back function is selected - short press the 'power/function' button until the 'Neck' icon appears on the top panel of your remote.
6. To select your desired mode, short-press the 'Mode' button. To find out which mode is best suited for you, please see our 'MODES' breakdown below.
7. Once you have selected your desired mode, enjoy a 12 minute session.
8. To turn off your LED Mask before you have completed your session, long-press the power/function button.
Hair:
1. Unclip the fasteners and remove the eye protection pads whilst ensuring the right and left straps are attached to the LED Mask.
2. Clip the fasteners into the hair fasteners located at the top of the mask. This will allow the mask to form into a 'dome' shape.
3. Turn the LED Mask upside-down to ensure the smaller STYLPRO logo is now facing upright.
4. Place the LED Mask onto your head and securely attach the straps around the back of your head/upper neck. Ensure the mask is covering your front hairline.
5. Long press the power/function button to turn on the LED Mask.
6. To ensure the Hair function is selected - short press the 'Power/Function' button until the 'Hair' icon appears on the top panel of your controller.
7. Once the Hair function has been selected, enjoy a 15-minute session.
8. To turn off your LED Mask before you have completed your session, long-press the power/function button.